The effect and function price of Wuxi injection press plate vulcanizer

News

The effect and function price of Wuxi injection press plate vulcanizer

发布者：中凯橡塑点击：1798

The injection pressing flat vulcanizing machine is mainly used for vulcanizing flat tapes, which has the advantages of high pressure per unit area of the hot plate, reliable operation and less maintenance. The primary function of the injection press is to supply the pressure and temperature required for vulcanization. The pressure is generated by the hydraulic system through the hydraulic cylinder, and the temperature is supplied by the heating medium. In the rubber industry, the column-type injection molding plate vulcanizer is an earlier model, but now the frame-type structure is mostly used. Compared with the column type injection molding flat vulcanizing machine, the frame type injection pressing flat vulcanizing machine has certain advantages. The difference between each measuring point at the normal vulcanization time of the hot plate is controlled by ±3°C. Taking into account the uniformity of the heating temperature, each hot plate should be divided into multiple sections of steam in and out, and a temperature sensor should be installed on each layer of the hot plate; the temperature display, pressure display and temperature and pressure overrun alarm on the PLC contact display screen on the console System. Prompt the temperature value error and pressure of each layer, so that the operator can take appropriate measures. The vulcanization temperature of the injection-pressing plate vulcanizer equipment can be controlled between 145-160°C, and the pressure can be controlled between 0.8Mpa-24Mpa. The PLC and control system of the injection and pressure plate vulcanizing machine store the temperature, system pressure and time data at each point of the vulcanization process; the current time-temperature, time-pressure can be displayed on the same screen, and historical data can be inquired at any time to trace quality problems. The tread pattern of the injection molding vulcanizer is smoothly exhausted, and the pressure during exhausting, the number of seconds during exhausting, and the number of exhausting can be set on the screen. After exhausting the gas, the vulcanization and pressurization process can be gradually divided into 6 stages. The user can set the pressure value and interval time of each stage, and the entire vulcanization process will be automatically completed after setting.

next page：Jiangyin injection pressure flat vulcanizer maintenance and precautions factory

Service Hotline

address

fax

Mail